2.8L Diesel Engine

Fig 1: WATER PUMP

Courtesy of CHRYSLER LLC

Clean mating surfaces of water pump housing and engine block as necessary.
Place new O-ring in groove in water pump housing.
Install the water pump and the mounting bolts. Tighten the water pump bolts to 32 Nm (24 ft. lbs.)

Fig 2: INNER FRONT COVER
Courtesy of CHRYSLER LLC
Install the inner front cover.

Fig 3: TIMING BELT
Courtesy of CHRYSLER LLC
Install the timing belt.

Fig 4: LOWER FRONT COVER
Courtesy of CHRYSLER LLC
Install the outer front cover (2).
Install the crankshaft damper (1).

Fig 5: UPPER FRONT COVER
Courtesy of CHRYSLER LLC
Install the upper front cover (2).

Fig 6: FRONT LIFTING BRACKET
Courtesy of CHRYSLER LLC
Install the lifting bracket.
Install the fan. See Cooling/Engine/FAN, Cooling - Installation
Evacuate air and refill cooling system. See Cooling/Engine/PUMP, Water - Standard Procedure
Connect negative battery cable.
Check cooling system for leaks. See Cooling - Diagnosis and Testing