LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2010 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension >> Front >> ARM, Lower Control >> Removal >> Removal

ARM, Lower Control: Removal: Removal

Fig 1: Upper And Lower Control Arm
GC0130302Courtesy of CHRYSLER LLC
  1. Raise and support the vehicle.
    NOTE: If the vehicle is equipped with a cam bolt service kit, paint or scribe marks on the cam adjuster and the suspension arm for installation reference.
  2. Remove the lower suspension arm nut and cam/bolt (3) from the axle.
  3. Remove the nut and bolt (3) from the frame rail bracket and remove the lower suspension arm (4).
scientia non olet · About LEMON Manuals