Power Steering System: Pump: Removal: 3.8L

Fig 1: Pressure Hose

Courtesy of CHRYSLER LLC

1. Remove cap from power steering fluid reservoir.
2. Siphon as much fluid as possible from the power steering fluid reservoir.
3. Remove the air box assembly. Refer to Engine/Air Intake System/BODY, Air Cleaner - Removal .
4. Remove the pressure hose at the pump.
5. Remove the supply hose from the pump.
   Fig 2: Mounting Bolts

   Courtesy of CHRYSLER LLC
6. Remove the drive belt. Refer to Cooling/Accessory Drive/BELT, Serpentine - Removal .
7. Remove the three front mounting bolts through the pulley (2).
8. Remove the pump (with pulley).
9. If the pulley (1) needs removal. See Steering/Pump/PULLEY, Power Steering Pump - Removal .