COIL, Ignition: Installation: 5.7L

Fig 1: REMOVING/INSTALLING IGNITION COIL

Courtesy of CHRYSLER LLC

Using compressed air, blow out any dirt or contaminants from around the top of the spark plug.
NOTE: Use dielectric grease on each of the spark plug boots before installing the coil.
Position the ignition coil(s) (1) into the valve cover and push onto the spark plug(s).

Fig 2: IGNITION COIL
Courtesy of CHRYSLER LLC
Install the ignition coil retaining bolts (2) and tighten to 7 N.m (62 in. lbs.).
Connect the electrical connector (1) to the ignition coil(s).