SENSOR, Fuel Pressure: Installation: Installation

Fig 1: Identifying Fuel Rail & Fuel Rail Pressure Sensor

Courtesy of CHRYSLER LLC

1. Install the fuel rail pressure sensor (2) onto fuel rail (1). Tighten sensor (2) to 35 N.m (26 ft. lbs.).
   Fig 2: Identifying Lock Tabs & Engine Wire Harness

   Courtesy of CHRYSLER LLC
2. Position the wire harness (2) and push down to lock tabs (1).
   Fig 3: Identifying Fuel Rail Pressure Regulator Harness Connector

   Courtesy of CHRYSLER LLC
3. Connect the fuel rail pressure sensor harness connector (2).
4. Connect the negative battery cable.