TRANSDUCER, EGR Back Pressure: Installation: Installation

Fig 1: Identifying Sealing Washer & EGR Back Pressure Transducer

Courtesy of CHRYSLER LLC

1. Using a new sealing washer (1), install the EGR back pressure transducer (2). Tighten transducer (2) to 25 N.m (18 ft. lbs.).
   Fig 2: Identifying EGR Back Pressure Transducer Harness Connector

   Courtesy of CHRYSLER LLC
2. Connect the EGR back pressure transducer harness connector (1).
3. Install the engine cover.
4. Connect the negative battery cable.