3.0L Diesel
WARNING:
Risk of injury to skin and eyes from scalding with hot coolant. Risk of poisoning from swallowing coolant. Do not open cooling system unless coolant temperature is below 90°C (194°f). Open cap slowly to release pressure. Store coolant in suitable and appropriately marked container. Wear protective gloves, clothes and eye wear.
NOTE:
Inspect condition of all clamps and hoses, replace as necessary.
| 1 - MOUNTING BOLTS |
| 2 - THERMOSTAT HOUSING |
- Disconnect negative battery cable.
- Remove engine cover. Refer to Engine - Removal .
- Drain engine coolant. See Cooling - Standard Procedure .
- Remove bracket for fuel line.
- Remove coolant hoses and vent hose from thermostat housing (2).
- Remove mounting bolts (1) from thermostat housing.
- Pull thermostat housing (2) back and remove thermostat and sealing ring. Discard sealing ring.
- Clean all sealing surfaces.