LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2010 >> Commander Limited, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System & Automatic Transmission Cooling System >> Engine >> HEATER, Engine Block >> Installation >> 5.7L Engine

5.7L Engine

Fig 1: BLOCK HEATER 5.7L
GC0091808Courtesy of CHRYSLER LLC
1 - BLOCK HEATER
  1. Thoroughly clean cylinder block core hole and block heater seat.
  2. Insert block heater assembly (1) into the block.
  3. With block heater fully seated, tighten bolt (1) to 2 N.m (17 in. lbs.) torque.
scientia non olet · About LEMON Manuals