LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Wrangler X, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Engine >> HEATER, Engine Block >> Removal >> 3.8L Engine

3.8L Engine

Fig 1: Engine Block Heater
GC0100769Courtesy of CHRYSLER LLC
1 - POWER CORD
2 - BLOCK HEATER
3 - CORE HOLE
  1. Drain cooling system. See Cooling - Standard Procedure .
  2. Raise vehicle on hoist.
  3. Detach power cord plug from heater.
  4. Loosen screw in center of heater. Remove heater assembly.
scientia non olet · About LEMON Manuals