PULLEY, Power Steering Pump: Installation: Diesel

Fig 1: Removing/Installing Steering Pump - 2.8L

Courtesy of CHRYSLER LLC

1. Install the pulley (3) to the pump shaft.
2. Install the three bolts (4) securing the pulley (3) to the pump (2). Tighten to 47 N.m (35 ft. lbs.).
   Fig 2: Turbo Air Inlet Tube

   Courtesy of CHRYSLER LLC
3. Install the serpentine belt.
4. Install the air inlet tube (1).
5. Install the air cleaner box. Refer to Engine/Air Intake System/BODY, Air Cleaner - Installation .