Power Steering System: Pump: Installation: 2.8L-Diesel

Fig 1: MOUNTING BOLTS

Courtesy of CHRYSLER LLC

1. Install the pump to the vehicle.
2. Install the three bolts (2) securing the pump (1) to the engine and tighten to 47 N.m (35 ft. lbs.).
   Fig 2: Removing/Installing Steering Pump - 2.8L

   Courtesy of CHRYSLER LLC
3. Install the power steering hoses (1 AND 6). Tighten to 28 N.m (21 ft. lbs.).
4. Install the power steering pulley to the pump.
5. Install the three bolts (4) securing the pulley (3) to the pump (2).
6. Install the serpentine belt.
   Fig 3: Turbo Air Inlet Tube

   Courtesy of CHRYSLER LLC
7. Install the air inlet tube (1).
8. Install the air cleaner box. Refer to Engine/Air Intake System/BODY, Air Cleaner - Installation .
9. Refill the power steering fluid and bleed the system. See Steering - Standard Procedure .