INJECTOR(S), Fuel: Installation: Installation

Fig 1: Fuel Injector And Rail Typical

Courtesy of CHRYSLER LLC

1 - FUEL RAIL ASSEMBLY

2 - FUEL INJECTOR

3 - FUEL RAIL RECEIVER

1. If same injector(s) is being reinstalled, install new O-ring(s).
2. Apply a small amount of clean engine oil to each injector O-ring. This will aid in installation.
3. Push fuel injector(s) into fuel rail assembly (3) until clip has latched.
4. Install fuel rail. Refer to INSTALLATION  .
5. Start engine and check for fuel leaks.