LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Compass Limited, ED3, FWD, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (2.0L Engine (Service Information)) >> Engine Block >> FRAME, Ladder >> Removal >> Removal

FRAME, Ladder: Removal: Removal

WARNING: This page is about a different variant/trim than selected.
Fig 1: Pry Point 1
GC0084843Courtesy of CHRYSLER LLC
  1. Remove oil pan. See Engine/Lubrication/PAN, Oil - Removal .
  2. Remove balance shaft assembly. See Engine/Lubrication/PUMP, Engine Oil - Removal .
  3. Remove ladder frame retaining bolts.
  4. Remove ladder frame using pry point cast in the rear of the block (1).
    Fig 2: Pry Point 2
    GC0084844Courtesy of CHRYSLER LLC
  5. To assist in removing the ladder frame another (1) pry point cast in the right side of the block.
scientia non olet · About LEMON Manuals