CABLE, Gearshift Control: Installation: Installation

Fig 1: Shifter Cable

Courtesy of CHRYSLER LLC

1. Install the shifter cable (1, 2) through the bulkhead and into the passenger compartment.
   Fig 2: Bracket At Bulkhead

   Courtesy of CHRYSLER LLC
2. Install the cable into the bracket (2) at bulkhead (1).
   Fig 3: Shifter Cable Clip At Floor

   Courtesy of CHRYSLER LLC
3. Insure that the cable clips into place.
4. Tighten the hold down bolts at the air bag module. Refer to Restraints/MODULE, Occupant Restraint Controller - Installation .
5. Install the shifter. See Transmission and Transfer Case/Automatic - CVT/SHIFTER, Transmission - Installation .
   Fig 4: Shifter Cable Grommet

   Courtesy of CHRYSLER LLC
6. Install the shifter cable grommet (1) at the bulkhead.
   Fig 5: Shifter Cable & Bracket

   Courtesy of CHRYSLER LLC
7. Clip the cable (2) into the bracket (1) install the nut (4) over the shifter cable at the transmission shift lever. See Transmission and Transfer Case/Automatic - CVT/CABLE, Gearshift Control - Adjustments .
   Fig 6: Air Cleaner Assembly

   Courtesy of CHRYSLER LLC
8. Connect the negative battery cable (2).
9. Install the air box (1)