Diagnostic Test

WARNING: This page is about a different variant/trim than selected.

TRANSMISSION CONTROL MODULE
View repair

Repair
- Using the schematics as a guide, check the Transmission Control Module (TCM) pins, terminals, and connectors for corrosion, damage, or terminal push out. Pay particular attention to all power and ground circuits. If no problems are found, replace the TCM per the Service Information. Refer to Electrical - Electronic Control Modules/Electronic Control Modules/MODULE, Transmission Control - Removal
- Perform NAG1 TRANSMISSION VERIFICATION TEST. See DTC-Based Diagnostics/MODULE, Transmission Control (TCM) - Standard Procedure