LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander Overland, RWD >> Repair and Diagnosis (Single Page) >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> PLUG, Glow >> Installation >> Installation

PLUG, Glow: Installation: Installation

  1. Install glow plug. Tighten glow plugs to 12 Nm (106 lbs. in.).
  2. Connect glow plug electrical connector (1).
  3. Install engine cover. Refer to Engine - Installation .
  4. Connect negative battery cable.
scientia non olet · About LEMON Manuals