Diagnostic Test

VERIFY PCM PROGRAMMING
1. Use the scan tool and erase all codes in the ECM/PCM.
2. Turn the Ignition Off, and wait 15 seconds before turning the Ignition On.
3. Wait one minute, and read active ECM/PCM codes.
  Does the scan tool display this DTC as active?
  
  Yes
  - Program the Powertrain Control Module in accordance with the Service Information.
  - Perform the WIN VERIFICATION TEST. See DTC-Based Diagnostics/NODE, Wireless Ignition (WIN) - Standard Procedure
  No
  - Repair is complete.
  - Perform the WIN VERIFICATION TEST. See DTC-Based Diagnostics/NODE, Wireless Ignition (WIN) - Standard Procedure