LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander Overland, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine & Automatic Transmission Cooling System >> Engine >> HEATER, Engine Block >> Removal >> 3.7L Engine

3.7L Engine

Fig 1: ENGINE BLOCK HEATER 3.7L
GC0118274Courtesy of CHRYSLER LLC
1 - POWER CORD
2 - BLOCK HEATER
3 - CORE HOLE
  1. Drain cooling system. See Cooling - Standard Procedure .
  2. Raise vehicle on hoist.
  3. Detach power cord plug (1) from heater (2).
  4. Loosen screw in center of heater. Remove heater assembly (2).
scientia non olet · About LEMON Manuals