Section 2 (4.7L Engine (Service Information)): Specifications: Torque
WARNING: This page is about a different variant/trim than selected.
| DESCRIPTION |
N.m |
Ft. Lbs. |
In. Lbs. |
| Camshaft Sprocket Bolt |
122 |
90 |
- |
| Camshaft Bearing Cap Bolts |
11 |
- |
100 |
| Timing Chain Cover Bolts |
58 |
43 |
- |
| Connecting Rod Cap Bolts |
27 + 90° |
20 + 90° |
- |
| Bed Plate Bolts |
Refer to Procedure |
| Cylinder Head Bolts |
Refer to Procedure |
| Crankshaft Damper Bolt |
175 |
130 |
- |
| Cylinder Head Cover Bolts |
12 |
- |
105 |
| Exhaust Manifold Bolts |
25 |
18 |
- |
| Exhaust Manifold Heat Shield Nuts |
8 Then loosen 45° |
- |
72 Then loosen 45° |
| Flexplate Bolts |
60 |
45 |
- |
| Engine Mount Bracket to Block Bolts |
61 |
45 |
- |
| Rear Mount to Transmission Bolts |
46 |
34 |
- |
| Generator Mounting Bolts |
- |
| M10 Bolts |
54 |
40 |
- |
| M8 Bolts |
28 |
- |
250 |
| Intake Manifold Bolts |
12 |
- |
105 |
| Oil Pan Bolts |
15 |
- |
130 |
| Oil Pan Drain Plug |
34 |
25 |
- |
| Oil Pump Bolts |
28 |
- |
250 |
| Oil Pump Cover Bolts |
12 |
- |
105 |
| Oil Pickup Tube Bolt and Nut |
28 |
- |
250 |
| Block Bolt |
15 |
- |
130 |
| Oil Fill Tube Bolts |
12 |
- |
105 |
| Timing Chain Guide Bolts |
28 |
- |
250 |
| Timing Chain Tensioner Arm |
28 |
- |
250 |
| Hydraulic Tensioner Bolts |
28 |
- |
250 |
| Timing Chain Primary Tensioner Bolts |
28 |
- |
250 |
| Timing Drive Idler Sprocket Bolt |
34 |
25 |
- |
| Thermostat Housing Bolts |
13 |
- |
115 |
| Water Pump Bolts |
|
- |
- |