LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander Overland, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Electronic Control Modules (Service Information)) >> Electronic Control Modules >> Module-Final Drive Control >> Operation >> Modes Of Operation >> Limp-In Mode

Limp-In Mode

WARNING: This page is about a different car, the 2008 Jeep Commander. However, it is still accessible from the selected car via links, so may be relevant.

This mode is entered when the FDCM has detected an error condition that prevents the system from performing its' required task. The FDCM operation will vary depending from modified operation to total system shut down based on the failure that has occurred.

scientia non olet · About LEMON Manuals