LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander Overland, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Electronic Control Modules (Service Information)) >> Electronic Control Modules >> Module-Engine Control >> Operation >> Engine Control Module (ECM) >> Limp-In Mode

Limp-In Mode

WARNING: This page is about a different car, the 2008 Jeep Commander. However, it is still accessible from the selected car via links, so may be relevant.

If there is a fault detected with the accelerator pedal position sensor, the ECM will set the engine speed at 1100 RPM.

scientia non olet · About LEMON Manuals