LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander Overland, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (3.7L Engine (Service Information)) >> Engine Mounting >> Mount-Engine Front >> Removal >> Engine Mount

Engine Mount

WARNING: This page is about a different car, the 2008 Jeep Commander. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Engine Mount
GC0027232Courtesy of CHRYSLER LLC
  1. Disconnect negative battery cable.
  2. Raise vehicle.
  3. Remove engine mount through bolts.
  4. Raise engine using suitable jack.
  5. Remove engine mount bolts (2).
  6. Remove mount (1) from engine.
scientia non olet · About LEMON Manuals