LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander Overland, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (3.7L Engine (Service Information)) >> Engine Mounting >> Mount-Engine Front >> Installation >> Engine Mount

Engine Mount

WARNING: This page is about a different car, the 2008 Jeep Commander. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Engine Mount
GC0027232Courtesy of CHRYSLER LLC
  1. Install the engine mount (1).
  2. Tighten the bolts to 30 N.m (22 ft.lbs.).
  3. Lower the engine.
  4. Install the through bolts and nuts.
  5. Lower vehicle.
  6. Connect negative battery cable.
scientia non olet · About LEMON Manuals