Diagnostic Test
WARNING: This page is about a different car, the 2009 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- TEST FOR INTERMITTENT CONDITION
- Put the key in the ignition and turn the ignition on.
- With the scan tool, record and erase DTCs
- Operate the RKE transmitter in all positions several times.
- With the scan tool, read DTCs.
Does the scan tool display this DTC as active?
Yes
- Replace and program the RKE transmitter in accordance with the Service Information.
- Perform the BODY VERIFICATION TEST. Refer to DTC-Based Diagnostics/MODULE, Front Control (FCM) - Standard Procedure
No
- The conditions that caused this code to set are not present at this time. Inform the owner of the most probable cause for this code to set and therefore cause the RKE system to be inoperative.
- Perform the BODY VERIFICATION TEST. Refer to DTC-Based Diagnostics/MODULE, Front Control (FCM) - Standard Procedure