LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander Overland, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Memory Modules >> Park Assist Module (PTS) - Electrical Diagnostics >> DTC Troubleshooting >> B128F-25-PTS Sensor 2-Signal Shape / Waveform Failure >> Additional Wiring

Additional Wiring

For complete wiring diagrams, refer to SYSTEM WIRING DIAGRAMS .

NOTE: The numbering system for the park assist sensors allows for up to twelve sensors on the vehicle, six front and six rear. The sensors are numbered in a clockwise manner starting at the left front bumper. The left front sensor (if equipped with front park assist) is the number 1 sensor. The numbering continues in a clockwise direction around the vehicle. Since Chrysler Group vehicles use only four rear sensors, sensor numbers 7 and 12 are omitted, so the left rear sensor is the number 11 sensor.