LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander Overland, 4WD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Power Liftgate Control >> Removal >> Removal

Module, Power Liftgate Control: Removal: Removal

Fig 1: Identifying Power Liftgate Control Module
GC0132130Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the battery negative cable.
  2. Remove the left quarter trim panel from the vehicle. Refer to Body/Interior/PANEL, Quarter Trim - Removal .
  3. Disconnect the wire harness connectors (3) from the power liftgate control module (1).
  4. Remove the power liftgate control module (1) from the left rear wheel well (2).
  5. Remove the module (1) from the vehicle.
scientia non olet · About LEMON Manuals