LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander Overland, 4WD >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 88 (Electronic Control Modules (Service Information)) >> MODULE, Glow Plug >> Installation >> Installation

MODULE, Glow Plug: Installation: Installation

WARNING: This page is about a different car, the 2009 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the Glow Plug Module.
    Fig 1: Sprinter Glow Plug Module
    GC0081564Courtesy of CHRYSLER LLC
  2. Install the two Glow Plug Module bolts (2).
  3. Connect the battery positive harness connector (3) to the Glow Plug Module.
  4. Connect the Glow Plug Module wiring harness connector (4).
  5. Connect negative battery cable.
scientia non olet · About LEMON Manuals