LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander Overland, 4WD >> Repair and Diagnosis (Single Page) >> External Pages >> Different car >> Section 88 (Electronic Control Modules (Service Information)) >> MODULE, Door >> Removal >> Removal

MODULE, Door: Removal: Removal

WARNING: This page is about a different car, the 2009 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Memory Mirror Module
GC0118369Courtesy of CHRYSLER LLC
  1. Disconnect and isolate the negative battery cable.
  2. Remove the door trim panel. Refer to Body/Door - Front/PANEL, Door Trim - Removal .
    Fig 2: Electrical Connector
    GC0104140Courtesy of CHRYSLER LLC
  3. First disconnect the black 10-way electrical connector (1), then the brown 20-way electrical connector (2). If applicable, next disconnect the black 12-way electrical connector (3) from the module.
  4. Remove fasteners and module from vehicle.