Diagnostic Test

Verify DTC B2283-AUTO HEADLAMP LEVELING MODULE (AHLM) INTERNAL IS ACTIVE
NOTE: If a DTC is set, erase the DTC and attempt to reset the DTC. If the DTC resets, follow test.
1. This is an internal Auto Headlamp Leveling Module (AHLM) module failure.
2. View the repair.
  Does the DTC reset and read: B2283-AUTO HEADLAMP LEVELING MODULE (AHLM) INTERNAL?
  
  Repair
  - Replace the Auto Headlamp Leveling Module (AHLM) in accordance with the Service Information.
  - Perform the BODY VERIFICATION TEST. Refer to DTC-Based Diagnostics/MODULE, Front Control (FCM) - Standard Procedure .