LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2009 >> Commander Limited, 5.7 T, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 5.7L Engine (Service Information) >> Engine Mounting >> INSULATOR, Engine Mount, Rear >> Installation >> Installation

INSULATOR, Engine Mount, Rear: Installation: Installation

NOTE: Threadlocking compound must be applied to the bolts before installation.
  1. Install the two bolts that attach the transmission mount to the transmission bracket.
  2. Tighten the bolts to 61 N.m (45 ft. lbs.) torque.
  3. Lower the transmission so the transmission mount rests on the crossmember, and the studs of the transmission mount are aligned in the slots in the crossmember.
  4. Install the nuts onto the transmission mount studs through the crossmember access slot.
  5. Tighten the nuts to 54 N.m (40 ft. lbs.).
scientia non olet · About LEMON Manuals