ARM, Upper Control: Installation: Installation

Fig 1: Upper Control Arm

Courtesy of CHRYSLER LLC

1. Install the upper control arm (5) to the vehicle.
2. Install the nut and bolt (1) securing the upper control arm (5) to the body and tighten to 108 N.m (80 ft lbs).
   Fig 2: Steering Knuckle & Upper Ball Joint

   Courtesy of CHRYSLER LLC
3. Install the upper ball joint (2) into the knuckle (3).
4. Install the upper ball joint retaining nut (4) and tighten the nut to 95 N.m (70 ft. lbs.).
   Fig 3: Inner Fender Well

   Courtesy of CHRYSLER LLC

   1 - FENDER

   2 - INNER FENDER WELL

5. Install the inner fender well (2).
6. Install the tire and wheel.
7. Remove the supports and lower the vehicle.
8. Perform a wheel alignment. See Standard Procedure  .