LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Wrangler X, Automatic >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> Ignition Control - Service Information >> Glow Plug Relay >> Removal >> Removal

Glow Plug Relay: Removal: Removal

Fig 1: Identifying Glow Plug Relay (Right Hand Drive)
GC0063932Courtesy of CHRYSLER LLC
  1. RIGHT HAND DRIVE: 
  2. The glow plug relay (3) is located near the front of the battery (1).
  3. Disconnect negative battery cable.
  4. Carefully pull out mounting pin (2).
  5. Disconnect electrical connector (4) from relay.
    Fig 2: Identifying Glow Plug Relay (Left Hand Drive)
    GC0063933Courtesy of CHRYSLER LLC
  6. LEFT HAND DRIVE: 
  7. The glow plug relay (3) is located near the side of the battery (1).
  8. Disconnect negative battery cable.
  9. Carefully pull out mounting pin (2).
  10. Disconnect electrical connector (4) from relay.
scientia non olet · About LEMON Manuals