LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Wrangler X, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Shields-Heat >> Installation >> Heat Shields

Heat Shields

Fig 1: Muffler Heat Shield - Rear
GC0029837Courtesy of CHRYSLER LLC
1 - MUFFLER HEAT SHIELD - REAR
2 - NUTS
3 - SELF TAPPING SCREWS
  1. Position the heat shields to the floor pan or the frame and install the screws or nuts
    Fig 2: Muffler Heat Shield - Middle
    GC0029836Courtesy of CHRYSLER LLC
    1 - MUFFLER HEAT SHIELD - MIDDLE
    2 - NUTS
    3 - SELF TAPPING SCREWS
  2. Tighten the nuts or screws to 45 N.m (33 ft. lbs.).
  3. Lower the vehicle.
scientia non olet · About LEMON Manuals