LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Wrangler Rubicon, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System (Service Information) >> Rear >> Upper Control Arm >> Removal >> Upper Control Arm

Upper Control Arm

Fig 1: Upper & Lower Suspension Arms
GC0063459Courtesy of CHRYSLER LLC
  1. Raise and support the vehicle.
  2. Remove the tire and wheel assembly.
  3. Remove the upper suspension arm flagnut and bolt at the axle bracket.
  4. Remove the flagnut and bolt (1) at the frame rail mount and remove the upper suspension arm (2).
scientia non olet · About LEMON Manuals