LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Wrangler Rubicon, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Clutch) >> Flywheel >> Installation >> Installation

Section 1 (Clutch): Flywheel: Installation: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Clean the surfaces of the flywheel and pressure plate.
  2. Install flywheel with new  bolts and tighten in a criss-cross pattern. Tighten bolts to 95 N.m (70 ft. lbs.). On 2.8L diesel engine tighten bolts to 25 N.m (180 ft. lbs.) then rotate wrench 60°.
  3. Install clutch disc and pressure plate.
  4. Install transmission.
scientia non olet · About LEMON Manuals