LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Liberty Limited, 4WD, Part Time >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Suspension System >> Front >> Upper Control Arm >> Removal >> Upper Control Arm - Left

Upper Control Arm - Left

  1. Raise and support the vehicle.
  2. Remove the left side tire and wheel assembly.
    Fig 1: Upper Ball Joint Separation
    GC0061153Courtesy of CHRYSLER LLC
  3. Remove the upper ball joint nut.
  4. Separate the upper ball joint from the steering knuckle (3) using remover 9360 (2).
    Fig 2: Identifying Battery Tray, Power Center & Battery
    GC0061163Courtesy of CHRYSLER LLC
  5. Lower the vehicle.
  6. Remove the battery. Refer to REMOVAL .
  7. Unclip the power center (2) and move it to the side out of the way.
  8. Remove the battery tray (1). Refer to REMOVAL .
    Fig 3: Pivot Bolts
    GC0061166Courtesy of CHRYSLER LLC
  9. Remove the upper control arm rear nut (2) by using a ratchet and extension under the steering shaft (3).
  10. Remove the upper control arm front bolt.
  11. Remove the upper control arm from the vehicle.
scientia non olet · About LEMON Manuals