Upper Control Arm - Left

Fig 1: Pivot Bolts

Courtesy of CHRYSLER LLC

Install the upper control arm to the vehicle.
Install the upper control arm front flag bolt (1). Tighten the nut (2) to 122 N.m (90 ft. lbs.) with full vehicle weight.
Install the upper control arm rear flag bolt. Tighten the nut to 122 N.m (90 ft. lbs.) with full vehicle weight.

Fig 2: Identifying Battery Tray, Power Center & Battery
Courtesy of CHRYSLER LLC
Install the battery tray (1). Refer to INSTALLATION .
Install the battery. Refer to INSTALLATION .
Reclip and mount the power center (2).
Install the upper ball joint nut. Tighten the nut to 41 N.m (30 ft. lbs.) plus an additional 90° turn.
Install the left side tire and wheel assembly. Refer to STANDARD PROCEDURE .
Lower the vehicle.
Set the toe. See STANDARD PROCEDURE .