Power Outlet-Ac: Installation

Fig 1: View Of Back Side Of Floor Center Console Rear Trim Panel

Courtesy of CHRYSLER LLC

Install the AC power outlet into the floor console rear trim panel. Push the outlet firmly into the trim panel until the retaining tabs are fully seated.
If equipped, connect the rear heated seat switches (1), 115 Volt power outlet (3) and the auxiliary audio jacks (2) electrical connectors to the floor console rear trim panel.

Fig 2: View Of Center Floor Console Rear Trim Panel
Courtesy of CHRYSLER LLC
Align the trim panel (3) to the console and insert the bottom tabs into the mounting slots.
Tilt the upper edge of the trim panel (1) forward and apply hand pressure to seat all retaining clips.
Connect the battery negative cable.