BLOCK, Fuse: Installation: Installation
WARNING: This page is about a different car, the 2009 Jeep Patriot and 2009 Jeep Compass. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
ON VEHICLES EQUIPPED WITH AIRBAGS, REFER TO SERVICE INFORMATION
ARTICLE
BEFORE ATTEMPTING ANY STEERING COLUMN OR INSTRUMENT PANEL COMPONENT DIAGNOSIS OR SERVICE. FAILURE TO TAKE THE PROPER PRECAUTIONS COULD RESULT IN ACCIDENTAL AIRBAG DEPLOYMENT AND POSSIBLE PERSONAL INJURY.
- Install the new wire harness and fuse block into the vehicle.
- Position the fuse block onto the mounting bracket and push down until the mounting clips are fully seated.
- Install the front bumper fascia. Refer to Frame and Bumpers/Bumpers/FASCIA, Front - Removal .
- Connect the battery negative cable.