LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Compass Limited, AWD, Automatic CVT >> Repair and Diagnosis >> Transmission >> Transfer Case >> Power Transfer Unit >> Power Transfer Unit >> Extension Housing Dust Shield >> Installation >> Dust Shield-Extension Housing

Dust Shield-Extension Housing

Fig 1: Installing Dust Shield On Extension Housing
GC0056244Courtesy of CHRYSLER LLC
  1. Using a block of wood (2) install the dust shield (3) onto the extension housing (1).
    Fig 2: Extension And Pinion Housing Bolts
    GC0056206Courtesy of CHRYSLER LLC
  2. Install the extension housing and bolts.
  3. Tighten the extension housing bolts to 38 N.m (28 ft. lbs.).
  4. Install the propeller shaft. Refer to INSTALLATION .
scientia non olet · About LEMON Manuals