LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Commander Overland, 4WD >> Repair and Diagnosis (Single Page) >> Electrical >> Gauges >> Overhead Console (Service Information) >> Overhead Console - Service Information >> Module-Remote Compass >> Installation

Module-Remote Compass: Installation

Fig 1: Identifying Remote Compass Module
GC0045540Courtesy of CHRYSLER LLC
  1. Position the Remote Compass Module (RCM) (2) into the bracket on the upper side of the headliner (1).
  2. Install the RCM retaining screws (4).
  3. Connect the electrical connector (3).
  4. Install the headliner assembly, refer to INSTALLATION .
  5. Connect the battery negative cable.
  6. Perform the Compass Variation Adjustment, see STANDARD PROCEDURE .
  7. Perform the Compass Calibration, see STANDARD PROCEDURE .
  8. Verify proper compass operation.
scientia non olet · About LEMON Manuals