LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Commander Overland, 4WD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Vehicle Theft Security System - Electrical Diagnostics >> Vehicle Theft Security - Electrical Diagnostics >> DTC Troubleshooting >> B1A24-Key Not Programmed >> Diagnostic Test

Diagnostic Test

  1. KEY NOT PROGRAMMED 

    Turn the ignition on.

    Using a scan tool, attempt to program the key(s) into the WIN.

    Was the programming of the key(s) successful? 

    Yes 

    1. Programming of the key(s) were successful. Test complete.
    2. Perform WIN VERIFICATION TEST .

    No 

    1. Replace the ignition key and attempt to program it into the WIN. If the DTC resets, replace and program the Wireless Ignition Node in accordance with the Service Information.
      NOTE: If this vehicle is equipped with a Steering Column Lock Module, it must be replaced along with the WIN.
    2. Perform WIN VERIFICATION TEST .
scientia non olet · About LEMON Manuals