LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2008 >> Commander Base, 4.7 N, AWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (NV245 Transfer Case (Service Information)) >> Transfer Case - NV245 - Service Information >> Operation >> Transfer Case - NV245 >> Transfer Case Modes

Transfer Case Modes

WARNING: This page is about a different variant/trim than selected.

The transfer case operates in active full-time four-wheel drive (4 High Full-Time) unless the driver chooses 4-wheel drive Low or Neutral. A chrome T-handle momentary contact lever in the shifter assembly labeled 4WD Low allows the driver to select 4WD Low when a set of conditions is met. A separate Neutral pushbutton switch located beside the 4WD Low T-Handle is used by the operator to enter Neutral when a set of conditions is met. An indicator located in the instrument cluster indicates when 4WD Low is active. There is an indicator next to the Neutral button to indicate Neutral position as well as a message in the EVIC in the cluster that states "4WD SYSTEM IN NEUTRAL."

scientia non olet · About LEMON Manuals