LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler X, Automatic >> Repair and Diagnosis >> Steering >> Power Steering System >> Column >> Intermediate Shaft >> Installation >> Lower Intermediate Shaft

Lower Intermediate Shaft

Fig 1: Pinch Bolt At Column Shaft
GC0064519Courtesy of CHRYSLER LLC
  1. Install the intermediate shaft to the vehicle.
  2. Install the lower intermediate shaft (3) to the upper intermediate shaft (1).
  3. Install the upper pinch bolt (2) and tighten the bolt to 49 N.m (36 ft. lbs.).
    Fig 2: Lower Coupling At Gear
    GC0064522Courtesy of CHRYSLER LLC
  4. Install the coupler (1) at the steering gear (2).
  5. Install the lower coupler pinch bolt at the steering gear and tighten the bolt to 49 N.m (36 ft. lbs.).
  6. Unlock the steering wheel.
  7. Reconnect the negative battery cable.
scientia non olet · About LEMON Manuals