LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler X, Automatic >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> DTCS B1C28 To B2208 >> B2101-Ignition Run/Start Input Circuit Low >> Monitor Conditions

Monitor Conditions

  1. When Monitored: 

    While the CAN bus is RUN or SNA (signal not available) and the IOD status is "IN". The Occupant Restraint Controller (ORC) checks the Fused Run/Start Relay Output (Run-Start) circuit voltage.

scientia non olet · About LEMON Manuals