LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.8L Engine (Service Information) >> Engine Mounting >> Mount-Rear >> Removal >> Rear Mount >> Automatic Transmissions

Automatic Transmissions

Fig 1: Rear Mount (Automatic Transmission)
GC0064410Courtesy of CHRYSLER LLC
1 - BRACKET
2 - CUSHION
3 - BRACKET
  1. Disconnect negative cable from battery.
  2. Raise the vehicle and support the transmission.
  3. Remove the nuts holding the support cushion to the skid plate.
  4. Remove nuts holding support cushion to transmission support bracket. Remove the support cushion (2). See Fig 1.
  5. Remove the bolts holding the transmission support bracket to transmission.
  6. Remove the transmission support bracket.
scientia non olet · About LEMON Manuals