LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.8L Engine (Service Information) >> Engine Mounting >> Mount-Front >> Removal >> Removal Front Engine Mount

Removal Front Engine Mount

  1. Disconnect the negative cable from the battery.
  2. Remove the engine oil filter.
  3. Support the engine with a suitable jack and a block of wood across the full width of the engine oil pan.
  4. Remove the cylinder block-to-insulator mount bolts and the nut from the engine insulator mount through bolt.
  5. Using the jack, raise the engine high enough to remove the engine insulator mount thru bolt and the insulator mount.
scientia non olet · About LEMON Manuals