LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 3.8L Engine (Service Information) >> Engine Mounting >> Mount-Front >> Installation >> Installation Front Engine Mount

Installation Front Engine Mount

  1. Position the insulator mount and install the insulator mount through bolt.
  2. Lower the engine until the cylinder block-to-insulator mount bolts can be installed.
  3. Remove the jack and block of wood.
  4. Torque the cylinder block-to-insulator mount bolts to 61 N.m (45 ft. lbs.).
  5. Install and torque the through bolt retaining nut to 61 N.m (45 ft. lbs.).
scientia non olet · About LEMON Manuals