LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Liberty Limited, RWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery System >> Battery Tray >> Installation >> Battery Tray

Battery Tray

Fig 1: Battery Tray Location
GC0026361Courtesy of CHRYSLER LLC
  1. Clean and inspect the battery tray (1). See CLEANING .
  2. Position the battery tray (1) onto the weld studs on the front extension of the left front wheelhouse inner panel.
  3. Install the three nuts (2) that secure the battery tray (1) to the weld studs on the front extension of the left front wheelhouse inner panel. Tighten the nuts to 7 N.m (65 in. lbs.).
  4. Install the PDC on the battery tray.
  5. Install the battery onto the battery tray. See INSTALLATION .
scientia non olet · About LEMON Manuals