LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2007 >> Liberty Limited, RWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery System >> Battery Cables >> Installation >> Battery Cables

Battery Cables

  1. Position the battery cable in the vehicle.
  2. One at a time, trace and install the battery cable retaining fasteners and routing clips until the desired cable is properly installed in the engine wire harness assembly.
  3. Install the tape on the engine wire harness assembly.
  4. Connect the negative battery cable terminal.
scientia non olet · About LEMON Manuals